Dubbing/Editing; Connectingto A Vcr Or Tv - Sony HANDYCAM DCR-TRV361 Operation Manual

Dubbing/Editing
Connectingto a VCR
or TV
You can record the picture from a VCR or TV
to a tape or a "Memory Stick" inserted into
your camcorder (p. 88). You can also create a
copy of the picture recorded on your
camcorder on other recording device (p. 87).
Connect your camcorder to a TV or VCR as
shown in the following illustration.
AN jack
Connecting with an i.LINK cable
S VIDEO jack
AN connecting cable
(supplied)
L222:_!_1.12__ Signal flow
* Pictures can be reproduced more Pait h fully by using
an g video cable (optional). When there is an S video
jack on the device to he connected, connect the g
video plug to that jack instead of using the yellow
video plug. The audio will not be output when you
connect with the S video plug alone.
O Notes
• Use the A/V connecting cable to connect your
camcorder 1o other devices. Before connecting,
make sure the [DISPLAY] se_ting in the _2_
(STANDARD SET) menu is set to [LCD PANEL]
0he det:ault setting) (p. 81).
• When you are connecting your camcorder to
monaural device, connect the yellow plug oflhe A/
V connecting cable to the video jack, and the red
(right channel) or the white (loll channel) plug to the
audio jack on the VCR or the TV.
S VIDEO*
Yelto_ _ VIDEO
White I '
Red
VCRs or TVs
To use an i.LINK cable for connection
Use an i.LINK cable (optional) lo connect your
camcorder to oiher device via the [ DV
interlace. The video and sound signals are
transmiited digitally, producing high quality
pictures. Nolo lhat you cannot record lhe picture
and sound separalely. For details, see page 119.
86 Dubbing/Editing