INSTALLATION INSTRUCTIONS
Adjustable Finishing 1" Trim 2775LFB
Use with Valor LT2 2700 Heater Models ONLY (series K or later)
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and must be
installed for the protection of children and other at-risk
individuals.
The 2775LFB Linear 1-inch finishing trim is designed
to be used on Linear LT2 2700 Valor heaters.
The application of this kit does not affect the venting
capabilities or method of preparation of the 2700 heater
as described in the installation manual.
51-3/8" [1303 mm]
Trim size
4009512-01
©2023, Miles Industries Ltd.
LT2 Series
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
INSTALLER: Leave this
manual with the appliance.
CONSUMER: Retain this
manual for future reference.
Note: This kit must be
installed or serviced by a
qualified installer, service
agency or gas supplier. These
instructions are to be used
in conjunction with the main
installation instructions
for the above listed heater
model.
This trim fits flat against the front of the cement board
with the ability to tuck additional materials up to 1/2"
thickness behind the trim.
DO NOT COVER the trim with any finish! See appliance
installation manual for more information about
finishing around this kit.
Overview (2700 engine and 2775LFB sold separately)
2700 Fireplace
Side doors
Cover plate
Trim
Barrier screen
1