Table of Contents
Advertisement
Problem solving guide
Message
lights up red in the
display and an alarm
also sounds.
68
Cause and remedy
Indication of an interruption to the power supply: the
temperature in the refrigeration appliance over the
last few days or hours has risen too high because of
a power cut or interruption to the power supply.
Tap
.
The fault message is confirmed:
goes out and the alarm will stop.
The warmest temperature recorded in the
refrigeration appliance will flash for about 1 minute in
the display. Then the temperature display will change
to the current temperature.
You can exit from the flashing temperature display
early:
Touch the temperature display.
The warmest temperature displayed will disappear.
The display will then revert to showing the current
temperature. The refrigeration appliance will go back
to the last temperature setting when the power is
back on.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, it should
be used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
Advertisement
Table of Contents
