Table of Contents
Advertisement
LFO
The contents will change, depending on the setting of the LFO select button (button 24).
CONTENTS
This adjusts the amount of
low-frequency signals that are
allowed to pass through
unimpeded.
This sets the depth of LFO
modulation for the OSC-1
oscillation frequency.
|
|
EG
Itis possible to independently set
the LFO modulation for OSC-1,
OSC-2, and the VCF.
The contents will change, depending on the setting of the EG SELECT button (button 30).
Sets
the attack time. O is the minimum setting and 99 is
the maximum setting.
Sets the decay time. O is the minimum setting
and 99 is
the maximum setting.
21
This adjusts the LFO modulation
speed.
22
DELAY
This adjusts the amount of time
to
delay from when the key (of the
keyboard) was struck until the
E 35
LFO modulation starts to take
effect.
E 38
23
WAVE
This select the LFO oscillation
| (Pulse wavetorm |. L
waveform.
К
|
E
TINAA
|
(Sawtooth waveform I) |\,
(Sawtooth waveform Il) 1
24
LFO
This selects the destination
of the
SELECT
LFO signals.
Advertisement
Table of Contents
