Advertisement
Assembly & Installation
Option 2: Grommet – Install into Grommet Hole or Drilled Hole
Step 2A: Separate the components from Clamp (A4) by using the Philips Head Screwdriver (B6). Put the mounting plate
onto the threaded knob screw.
Step 2B (Optional): For installations on a tabletop WITHOUT a grommet hole or predrilled hole, use a drill with a 3/8" drill
bit.
Step 2C: Insert the threaded knob screw and plate into the bottom side of the tabletop. Align with the hole on the base
plate assembly. Tighten the knob to secure the monitor stand to the tabletop.
P a g e | 8
Advertisement
