Advertisement
Assembly & Installation
Step 2C: For tabletop thickness 0.4" to 1.75" skip to Step 2D.
For tabletop thickness 1.75" to 3.3", unscrew the preinstalled screw on the Clamp (A4) using the Philips Head Screwdriver
(B6). Separate the clamp components, flip the small bracket, and put the parts back together. Tighten the screw using the
Philips Head Screwdriver (B6).
Step 2D: Hook on Clamp (A4) to the loose screws from Step 2B. Tighten both M6x10 Screws (B3) using the 4mm Hex Key
(B4).
Step 2E: Place the assembly on your desired tabletop location and secure by tightening the clamp knob.
P a g e | 7
Advertisement
