Related Manuals for PROGRESSIVE DESK DM-04-1
Summary of Contents for PROGRESSIVE DESK DM-04-1
- Page 1 17"-32" Screen Size RATED 9kg/19.8lbs 75×75 100×100 Cable Management DM-04-1 User Manual Scan for more information V 1.1...
- Page 2 Table of Contents Specifications .................. 3 Parts List ..................4 Assembly & Installation ..............5 P a g e | 2...
- Page 3 Specifications Monitor Compatibility Up to 32" Weight Capacity 19.8 lbs. Product Weight 5.7 lbs. Clamp Desk Thickness 0.4" to 3.3" Grommet Desk Thickness 0.4" to 1.5" Grommet Hole Diameter 0.4" to 3.2" Cable Management Cable Cover, Cable Hooks VESA Compatibility 100mm ×...
- Page 4 Parts List Part Qty. Part Qty. Part Qty. Base Plate M5x16 Screw M4x12 Screws Mounting Pole M10x20 Screw M5x12 Screws Bracket M6x10 Screws Washers Clamp 4mm Hex Key 6mm Hex Key Philips Head Screwdriver Cable Hooks Cable Cover VESA Plate P a g e | 4...
- Page 5 Assembly & Installation Step 1: Attach the Base Plate Attach the Base Plate (A1) to the Mounting Pole (A2) using the M5x16 Screw (B1). Ensure the largest center holes on each part are aligned. Tighten with the Philips Head Screwdriver (B6). Step 2: Choose Installation Method (Clamp or Grommet) Option 1: Clamp Option 2: Grommet...
- Page 6 Assembly & Installation Option 1: Clamp – Mount to Side of Desk Step 2A: Align Bracket (A3) with the studs on the Base Plate (A1) and attach using the M10x20 Screw (B2). Tighten with 6mm Hex Key (B5). Step 2B: Insert 2x M6x10 Screws (B3) into the Bracket (A3) using the 4mm Hex Key (B4). DO NOT TIGHTEN the screws. Leave at least a 3/16"...
- Page 7 Assembly & Installation Step 2C: For tabletop thickness 0.4" to 1.75" skip to Step 2D. For tabletop thickness 1.75" to 3.3", unscrew the preinstalled screw on the Clamp (A4) using the Philips Head Screwdriver (B6). Separate the clamp components, flip the small bracket, and put the parts back together. Tighten the screw using the Philips Head Screwdriver (B6).
- Page 8 Assembly & Installation Option 2: Grommet – Install into Grommet Hole or Drilled Hole Step 2A: Separate the components from Clamp (A4) by using the Philips Head Screwdriver (B6). Put the mounting plate onto the threaded knob screw. Step 2B (Optional): For installations on a tabletop WITHOUT a grommet hole or predrilled hole, use a drill with a 3/8” drill bit.
- Page 9 Assembly & Installation Step 3: Position the VESA Mount Step 3A: Slide the VESA Plate (A8) onto the VESA mount of the Arm (A5). Step 3B: Rotate the VESA mount 90 degrees so that the connector is facing up as seen below. Step 3C: Remove the VESA Plate (A8) from the Arm (A5) and set aside for Step 6.
- Page 10 Assembly & Installation Step 4: Install the Arm Step 4A: Place the Arm (A5) on the Mounting Pole (A2). Step 4B: Secure the Arm (A5) at the desired height by tightening the preinstalled screw with the 6mm Hex Key (B5). Step 5: Attach the Cable Management Hooks and Cover Step 5A: Attach 2x Cable Hooks (A6) to the Arm (A5).
- Page 11 Assembly & Installation Step 5B: Attach the Cable Cover (A7) to the Mounting Pole (A2). Step 6: Install VESA Plate to the Monitor Install a VESA Plate (A8) to your desired VESA compatible monitor. Align the VESA Plate (A8) with the top of the monitor.
- Page 12 Assembly & Installation Step 7: Slide the VESA Plate onto the Arm Slide the VESA Plate (A8) and monitor onto the Arm (A5). Secure the monitor using the M6x10 Screw (B3) and tighten with the 4mm Hex Key (B4). Step 8: Cable Management Attach the monitor cables and route them through the installed cable management hooks and cover.
- Page 13 Assembly & Installation Step 10: Adjustability Adjust the tilt of the monitor using the 6mm Hex Key (B5). Secure the monitor to the desired position by tightening the screw. Freely adjust rotation and orientation of the monitor by hand. Step 11: Optional Hex Key Storage Store the Hex Keys in the Cable Cover (A7) for future adjustments.