Advertisement
Assembly & Installation
Step 1: Attach the Base Plate
Attach the Base Plate (A1) to the Mounting Pole (A2) using the M5x16 Screw (B1). Ensure the largest center holes on each
part are aligned. Tighten with the Philips Head Screwdriver (B6).
Step 2: Choose Installation Method (Clamp or Grommet)
Option 1: Clamp – Mount to Side of Desk (Page 6)
Requirements: Desk Thickness 0.4" to 3.3"
Option 2: Grommet – Install into Grommet Hole or Drilled Hole (Page 8)
Requirements: Desk Thickness 0.4" to 1.5", Desk Hole Diameter 0.4" to 3.2"
Desk
Thickness
Option 1: Clamp
Desk Hole Diameter
Option 2: Grommet
P a g e | 5
Advertisement
