Magnavox 51MP392H Owner's Manual page 48

Appendix A
Ur set's HD input, HD INPUT-AV 4 is
signed to accept high-definition signal stan-
dards 480t) and 1080i as specified by the
Electlvnic Industries Association. Output stan-
dards may vaW by manufacturer. Refer to the
directions-for-use manual for the digital equip-
ment before connecting.
Your TV's HD input jacks are compatible with
some digital equipment having RGB outputs with
"sync on green" or RGB with "separate H and V
sym'." As with HD component video s_nals, out-
put standards may val3, by manufactu_,_; Refer to
the directions-for-use manual for the receiver
befo_, connecting.
HELPFUL HINTS
• No industry sttmdards have been estab-
lished for HD television RGB signal sys-
tems, timing, synchronization, and signal
strengths. The HD INPUT-AV 4 RGB
inputs on your Magnavox TV will not be
compatible with all digital equipment that
offers RGB outputs. If the digital equip-
merit you wtmt to connect offers both
component video mad RGB, component
video is the suggested type of connection
to tlse.
• Your TV's onscreen INSTALL submenu
pmvkles the option of switching the AV4
signal sources between YPbPr and RGB
color-space settings. The option is avail-
able only when have selected the AV4
signal source (using the AV button on the
remote or the Source Select button on the
TV). The default setting for AV4 is
YPbPr.
HD INPUT-AV 4
When the Inputs Are Used with ComponentVideo Signals
Y INPUT: 1.0Vp-p (includes sync), 75 ohms
Pr INPUT: 700m Vp-p, 75 ohms
Pb INPUT: 700mVp-p, 75 ohms
NOTES:
The Pb INPUT jack can also receive signals from outputs labeled Cb or B-Y.
The Pr INPUT jack can also receive signals from outputs labeled Cr or R-Y.
When the Inputs Are Used with RGB Video Signals
G/Y: 1.0Vp-p, 75 ohms (compatible with sync on green)
R/Pr: 700 mVp-p, 75 ohms
B/Pb: 700 mVp-p, 75 ohms
H: 3Vp-p + 1.0k/, 1 kohm (when using separate H andV sync)
V: 3Vp-p + 1.0V, 1 kohm (when using separate H andV sync).
48