Magnavox 51MP392H Owner's Manual page 12

Connecting Accessory Devices to Your TV
omponent video inputs allow the highest pos-
s'ible color and picture resolution in the play-
back of digital signals, such as those of DVD
players. The color difference signals (Pb, Pr) and
the luminance (Y) s_nal are connected and
received separately. The result is better color
bandwidth information than is possible with com-
posite video (labeled VIDEO on your TV's jack
panel) or S-Video connections.
To make the connections shown in this example,
you will need:
• three cablesfi_r video connections (standard
RCA connectors)
• two cables for audio connections (standard
RCA connectors).
NOTE: The cables are not supplied with your TK
You should be able to buy them at most stores
that sell electl_mics'. Or you _ztn call our
Customer Care Center at 1-800-531-0039.
Rear of TV
Rear of DVD Player _
*(Example: Philips DVD model DVD712)
i i
Connect the YPbPr (component)
VIDEO OUT jacks from the DVD player
to the INPUT-AV 1 YPbPr (component
video) jacks on the rear of the TV.
NOTE: The INPUT-AV 1 YPbPr jacks
will accept 480i (interlaced) output sig-
nals only. The connection example on this
page assumes the use of a DVD player
with interlaced output. Some DVD play-
ers, however, have YPbPr outputs that can
be switched between interlaced and pro-
gressive scan. ff you are attempting to use
a DVD player with progressive-scan
(480p output) capability to make the con-
nection shown in this example, you must
be sure to switch the DVD player to inter-
laced, ff necessary, refer to the DVD play-
er's directions-for-use manual for help. If
you want to use the DVD player in pro-
gressive-scan mode, you must use the
HD INPUT-AV 4 jacks (see page 13).
Connect the AUDIO OUT L(eft) and
R(ight) jacks from the DVD player to the
INPUT-AV 1 AUDIO jacks on the rear of
the TV.
Press the AV button on the remote con-
trol as many times as necessary
to select
the CVI (component video input) source
on the TV.
Turn the DVD player on and press
PLAY to view the DVD program on the
TV.
[]
sr,,A_T S_a_
©Q
/
• To simplify making connections, the con-
nectors on audio ml(l video cables are
often color coded. The jacks on your TV
are likewise color coded to match the
connectors.
• The names for the component video jacks
may differ depending on the DVD player
or accessory digital source equipment
used. For example, besides YPbPr, you
may see R-Y/B-Y/Y; or CrCbY. Although
abbreviations trod terms may vary, the let-
ters B and R stand for the blue and red
color component signal connectors, respec-
tively, and Y indicates the luminance sig-
nal. If necessary, refer to the directions-for-
use manual for your DVD or digital acces-
sory for more infom3ation.
• You can also connect a satellite receiver
to the TV in a mtmner similar to the
example shown on this page. If you con-
nect a satellite receiver to the TM you
will need to use the receiver's channel-
memorization system to store channels in
the receiver's memory.
• If you experience difficulties receiving
sound with a DVD disc, check the sound
settings through the DVD disc's menu.
WARNING
To prevent unevenpicture-tubeaging, do not
leave nonmoving images or border bars on the
screen for an extended period. See page 49.
12