Magnavox 51MP392H Owner's Manual page 30

Using the Onscreen Submenus: Features
our TV _:omes with an onscreen.,, clock. You
'ill need to set the clock before you can use
the Timer feature. During nol_al operation, the
time appears on the sc_,en when you press the
STATUS/EXIT button. You can show the time on
screen constantly by turning the TIMER DIS-
PLAY cono_d on (see page 31).
For instructions on setting the Timer's START
and STOP times', see page 32. Then go to pages
33 and 34 to learn how to select the Timer's
channel and activate the Timer.
Press the MENU button
on the remote
control to show the onscreen menu.
Press the CURSOR BUTTON DOWN twice to highlight FEATURES.
Press the CURSOR BUTTON RIGHT
to enter the FEATURES submenu.
Press the CURSOR BUTTON RIGHT
again to shift the display left and high-
light the TIME control.
[l]lil!] Iilli
Press the CURSOR BUTTON RIGHT
II again to highlight the time indicator area.
Press the NUMBER buttons to enter
the correct time. If you make a mistake
entering the time, press the CURSOR
BUI_ON LEFT or RIGHT to move
anaong the input slots to make correc-
tions.
NOTE: You can also press the CURSOR
BUq_ON UP or DOWN to cycle
through digits to input the time.
Press the CURSOR BUTTON UP or
DOWN to select AM or PM.
Press the STATUS/EXIT button to exit
the menu.
• PICTURE TIMER
• SOUND AutoLock
CLOSED CAP
• INSTALL FORMAT
FEATURES
TIME
• AutoLock START TIME
• CLOSED CAP STOP TIME
• FORMAT CHANNEL
• ACTIVATE
FEATURES
TIMER •
• STARTTIME
• STOP TIME
• CHANNEL
• ACTIVATE
FEATURES
TIMER •
• TIME
• START TIME *
• STOPTIME
• CHANNEL
• ACTIVATE
HELPFUL HINTS
• For single-digit entries, be sure to press 0
fil5t and then the hour numbel:
• If you'd like, set die clock autommically
o TM
usin_ the AutoChmn ' featme (page 5.
Quick Use and Setup Guide).
• Clock settings may be lost when the TV is
unplugged or when AC power to the set is
interrupted.
30