Magnavox 51MP392H Owner's Manual page 13

he following instructions explain !_ow to con-
ect a DVD pla3er with progressive-scan
capability w the HD INPUT-AV 4 jacks on your
T_.
To make the connections, you will need:
• three cables for video connections (standard
RCA connectol_')
• two cables for audio connections (standard
RCA connectol_s').
NOTE: The cables are not supplied with your T_.
You should be able to buy them at most stores
tluat sell electronics'. Or you _n _ztll our
Customer Care Center at 1-800-531-0039.
Connect fi'om the YPrPb jacks on
the rear of the DVD player to file
HD INPUT-AV 4 G/Y, R/Pr, B/Pb jacks
on the rear of the TV.
Connect from the L(eft) and R(ight)
AUDIO OUT jacks on the rear of the
DVD player to the HD ]NPUT-AV4
AUDIO L(eft) and R(ight) jacks on the retu
of the TV.
Make sure the DVD player is in p]_-
gressive-scan mode. You will not get a
viewable picture through the HD [NPUT-
AV 4 jacks if the DVD player is in inter-
laced mode.
For more infommtion on placing your
DVD player in progressive-scan mode,
see the DVD player's directions-for-use
manual. Also, see the Helpful Hints to the
right. The way in which progressive-scan
mode ix selected varies among DVD play-
ers.
Press the AV button on your TV remote
control as many times as necessary to
select the AV4 signal source.
Turn the DVD on, insert a disc, and
press play to view a DVD on the TV.
If you experience difficulties receiving
sound with a DVD disc, check the sound
settings through the DVD disc's menu.
To prevent uneven picture-tube aging, do not
leave nonmoving images or border bars on the
screen for an extended period. See page 49.
Connecting Accessory Devices to Your TV
Rear of TV
Rear of DVD Player with Progressive-scan Capability
!
o
©©©
ff after connecting your DVD player your
display ix filled with wavy lines, it may be
that your DVD player ix not set to progres-
sive-scan mode. Some DVD players have an
I/P (interlaced/progressive scan) switch
located on the back or front of the players for
changing from interlaced to progressive-scan
mode. Other DVD players may allow the
mode to be changed by pressing a button on
the DVD player's remote control or by using
the DVD player's onscreen menu. If the
interlaced/progressive-scan selection option
ix provided only through the DVD onscreen
menu, you will need to connect the DVD
player to another AV input source in addition
to HD INPUT-AV 4 to see the DVD menu.
Select this additional AV source on screen to
see the DVD menu and choose progressive-
scan mode. You will then be able to see the
DVD picture through the AV4 source.
Some DVD players have dedicated progres-
sive-scan output jacks that are labeled as
such and require no switching to provide a
picture through the HD INPUT-AV 4 jacks.
See your DVD player's directions-for-use
manual for information,
The default color-space setting for the
HD INPUT-AV 4 jacks ix YPbPr. RGB ix
also an option. If the picture's color looks
grossly incorrect, try changing either the
DVD player's or TV's color-space setting.
See the DVD player's directions-for-use
manual for infi)rmation on setting its color
space.
13