Table of Contents
Advertisement
MICROPHONE
MIXING
You can mix audio through a microphone during playback.
Connect a source from which you want to mix sound, following the procedure shown on page 21.
NOTE:
If no external microphone is connected, you can mix sound from the built-in microphone.
1. Set the MIC MIX switch to "ON".
2. Slide the mode shifter to turn on VTR
power.
3. Press PLAY
button to play a tape.
e¢ The picture appears on the TV and sound is out-
put.
When you speak to the built-in microphone,
your voice is also output from the TV.
When ex-
ternal equipment is connected, the sound from it
is also output from the TV.
NOTE:
{f you
use this microphone
mixing function
when
copying
a tape from the camera/recorder
to a
VTR, you can copy the mixed sound.
INDEX SIGNAL RECORDING
MIC MIX Switch
PLAY
Button
Mode
Shifter
Indexing your tapes while recording makes it easy to
find desired program segments when you play back the
tape in a VTR
that has a compatible indexing feature
called the ''VHS
Index Search
System".
See your
VTR's
instruction
manual
for
index
playback
in-
structions.
INDEX signals are recorded when the following oper-
ations are performed.
¢
When the INDEX button is pressed during recording.
¢ When
the INDEX
button is pressed in the record/
pause (stand-by) mode and "INDEX" is displayed in
the viewfinder, then recording is started.
¢
When
power
is turned on about 4 hours after it is
switched off and then recording is started.
¢ When power is turned on after the date is changed
to the next day with the power off and then record-
ing is started.
NOTE: When INDEX button is pressed, 'INDEX'' is dis-
played in the viewfinder, and when an INDEX signal is
recorded, "INDEX"
disappears.
INDEX
INDEX Button
23
Advertisement
Table of Contents
