Table of Contents
Advertisement
3.6
Individual Operations of Maintenance
Every 50 hours of operation
3.6.11 Inspection of brakes
•
The function of the brakes must be checked periodically.
•
The cable / connector Y9, which must be disconnected for
the brake test, is located at the front under the hood.
•
Put the machine into the work gear.
•
Disconnect connector Y9 from the connector housing at the
magnet.
•
Use the sensor to activate the forward and reverse travel
function.
•
If a brake is defective, the corresponding drum will rotate.
If the brake is damaged, the machine must not be oper-
ated until the fault is rectified!
3.6.12 Electrical installation check
•
Check cables, connectors, protective hoses and their attach-
ments for damage, in particular if they are near hot surfaces
and moving parts of the machine including the engine. Re-
place damaged parts. Use only original spare parts.
100
PAGE 90 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL S/N 3069933~ — REV. #0 (11/29/23)
MAINTENANCE
555051
557038
RAMMAX 1575
Advertisement
Table of Contents
