Notice To reset the device, press and hold the reset button for 5s. The camera beeps when the operation is completed. LED indicator of camera: Wait for network config Flashing red light (slow) Connecting the network Flashing red light (fast)
0~90° 4. Product configuration Scan QR code to download and install the Arenti APP. Or you can search "Arenti" on App Store (iOS) or Google Play (Android). Registration Open the App. If you are a new user, tap to create a new account and follow the prompts to complete account setup.
Page 5
Pairing Open APP home page, Click "+" or "Add" and select icon according to actual camera. Power on the device. For about 30 seconds, the camera will emit start-up tone and LED indicator will flash red slowly. Note: When pairing, please put the camera and mobile phone close to the router.
Page 6
3. Make sure the camera is in pairing mode. 4. Check for network activity on your Wi-Fi. If none of the solutions work or if you have any other issues, please contact support@arenti.com for assistance. Notice If you have multiple cameras, please follow steps again to add devices one by one.
Hereby, we declares that the radio equipment type 'GO1' is in compliance with the Directive 2014/53/EU The full test of the EU declaration of conformity is available at the following Internet address:...
Page 14
1080 × 1920 135° ) 78°~-15° ( ) 355°~0° / iOS 9 2412-2472 www.arenti.com Direct current (DC) "G01" EU /2014/53 www.arenti.com...
Page 15
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Safety Information Power Adapter Safety: 1.The power plug is intended to serve as a disconnect device.Do not drop or cause an impact to the power adapter. 2.If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens,stop using it at once.