Programming Procedure Bolus Only Mode - Micrel Rhythmic evolution Instructions For Use Manual

5.2.6 Programming procedure Bolus only mode

BOLUS
05.
0
m1
LOCKOUT INTERNAL
015
min
SELECT LIMIT
DOSE BOLUS

LIMIT / HOURS
2 MAX BOLUS
DOSE
LIMIT
0180
m1/4hr
TIME
BOLUS
LIMIT
010
BOL /4hr
TIME
LOADING DOSE
02.
0
m1
MAX/ 24H 1010m1
VOLUME TO BE INFUSED
0160
m1
Always validate infusion protocol values by checking all parameters, prior to start the
infusion. If the Protocol values are not correct, please, restart the programming
procedure by pressing
VOL TB INF 160.0
BOLUS 5.0
LOCKOUT
LOAD DOSE
BOLUS / H 10BOL
/
42
Enter the patient BOLUS dose value and press
Enter the LOCKOUT INTERVAL value in minutes and press
If this parameter is not required, the value 000 should be entered.
Select one of the two limits by pressing the appropriate
key.
Enter the DOSE LIMIT value and press
DOSE LIMIT observation window can be changed in this screen
by pressing the
MAX BOLUS in the dose limit screen displays the maximum
possible number of patient bolus that the patient can get
within the preset period of time.
or
Enter the patient BOLUS LIMIT value and press
BOLUS LIMIT observation window can be changed in this screen
by pressing the
Note: If dose limit or bolus limit is not required, the value 0000
should be entered.
Enter the LOADING DOSE value if required and press
Note: If this parameter is not required, the value 000.0 should
be entered.
Enter the VOLUME TO BE INFUSED value and press
MAX/24H volume indication at the top of the screen indicate
the maximum volume that a patient can receive within 24
hours, according to the above programmed values of each
parameter.
!
Warning
when you are on the "PUMP ON HOLD" screen.
At the end of programming a summary of the protocol appears
m1
m1
on the screen, the programmed value of each parameter is
15
min
2.0
m1
displayed.
4
hr
Press
soft key.
TIME
soft key.
TIME
to scroll down the protocol.
.
.
.
.
.
.