Viking K-1900-3 Technical Practice page 2

Our Technical Support Department is available for assistance Monday 8am - 4pm and Tuesday through Friday 8am - 5pm central time. So that we can give you better service, before you call please:
Know the model number, the serial number and what software version you have (see serial label).
Have your Technical Practice in front of you.
It is best if you are on site.
Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA)
number. The customer MUST have a complete description of the problem, with all pertinent information regarding the
defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc.
Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static
sensitive equipment such as a circuit board should be in an anti-static bag, sandwiched between foam and individual-
ly boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include
ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to:
Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box.
RA number on carton: In large printing, write the R.A. number on the outside of each carton being returned.
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor or 18 months from the date manu-
factured, which ever is greater. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's
Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.) number.
This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by use of the product by the purchaser or others.
Vikings sole responsibility shall be to repair or replace (at Viking's option) the material within the terms stated above. VIKING SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND INCLUDING INCIDENTAL OR CONSE-
QUENTIAL DAMAGES RESULTING DIRECTLY OR INDIRECTLY FROM ANY BREACH OF ANY WARRANTY EXPRESSED OR IMPLIED, OR FOR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limi-
tation of incidental or consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED
BEYOND THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
This equipment complies with Part 68 of the FCC rules. Located on the equipment is a label that contains,
among other information, the FCC registration number and ringer equivalence number (REN). If requested, this
information must be provided to the telephone company.
The REN is used to determine the quantity of devices which may be connected to the telephone line.
Excessive REN's on the telephone line may result in the devices not ringing in response to an incoming call. In
most, but not all areas, the sum of the REN's should not exceed five (5.0) To be certain of the number of devices
that may be connected to the line, as determined by the total REN's, contact the telephone company to deter-
mine the maximum REN for the calling area.
This equipment cannot be used on the telephone company-provided coin service. Connection to Party Line
Service is subject to State Tariffs.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance
that temporary discontinuance of service may be required. If advance notice isn't practical, the telephone com-
pany will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with
the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could
affect the operation of the equipment. If this happens, the telephone company will provide advance notice in
order for you to make the necessary modifications in order to maintain uninterrupted service.
If trouble is experienced with this equipment, please contact: Viking Electronics, Inc., 1531 Industrial
Street, Hudson, WI 54016 (715) 386-8666
I n s t a l l a t i o
I n s t a l l a t i o
120V AC
13.8V AC
Adapter
Provided
* C.O. Line or Analog
PABX/KSU Station
Analog Entry Phone (not included)
- or -
K-1700-3
K-1900-8
* Note: When installing a K-1900-3 with a K-1700-3 phone on
a low voltage and/or low loop current phone system extension,
a PS-2R Talk Battery/Loop Current boosting power supply
may be required.
n
n
APARTMENT ENTRY
MODEL K-1900-3
POWER 13.8 VAC
LINE IN PHONE
Local Programming/
Security Code
Bypass Switch
Need More Information on the PS-2R?
?
Call (715) 386-4345 and select 512.
Customer must contact Viking's Technical Support at 715-386-8666 to determine possible causes for the problem. The
customer MUST be able to step through recommended tests for diagnosis.
If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input
and troubleshooting, a Return Authorization (R.A.) number will be issued. This number is valid for fourteen (14)
calendar days from the date of issue.
After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your
distributor will then replace the product over the counter at no charge. The distributor will then return the product to
Viking using the same R.A. number.
If the trouble is causing harm to the telephone network, the telephone company may request you to remove
the equipment from the network until the problem is resolved.
The K-1900-3 uses the USOC jack RJ11C.
It is recommended that the customer install an AC surge arrester in the AC outlet to which this device is con-
nected. This is to avoid damaging the equipment caused by local lightning strikes and other electrical surges.
This equipment is Hearing-Aid Compatible (HAC).
The telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device, including fax machines, to send any message unless such message clearly contains in a mar-
gin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is
sent and an identification of the business or other entity, or other individual sending the message and the tele-
phone number of the sending machine or such business, other entity, or individual. (The telephone number pro-
vided may not be a 900 number or any other number for which charges exceed local or long-distance transmis-
sion charges.)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radi-
ate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
SYSTEM
VIKING
ELECTRONICS
HUDSON, WI 54016
VIKING
©
RELAY CONTACTS AUX. 18 VDC
1A 1B TRIG. 200mA
INPUT - +
1 2 3 4 5 6 7 8 9 10
PROGRAMMING
OFF ON 1 2 3 4 5 6 7 8 9 10
Relay Contact Specifications:
5A@30VDC/250VAC maximum
Doorstrike/Magnetic Lock
Normally Closed Relay Contact
Normally Open Relay Contact
IMPORTANT: Electronic devices are sus-
!
ceptible to lightning and power station
electrical surges from both the AC outlet
and the telephone line. It is recommended that a
surge protector be installed to protect against such
surges. Contact Panamax at (800) 472-5555 or
Electronic Specialists Inc. at (800) 225-4876.
Door Strike/Magnetic Locks:
strike/magnetic lock information, contact your
distributor or JLM Wholesale at (800) 522-2940.
18VDC/200mA (maximum) Power Output:
+
-
for powering door strikes, magnetic locks, etc.
Auxiliary Relay Trigger Input:
momentary contact closure from postal lock, etc.
COM
Secondary Relay Contacts: to trigger
N.C
timed lights, camera control, etc.
N.O.
Note: Power typically not
required for gate controllers.
or
For door