AEG CDE84779XB User Manual page 28

28 www.aeg.com
Problem
The control bar blinks
twice and turns off.
The control bar for hood
blinks and the hood does
not start or turns off.
The hood fan does not
work properly when the
hood functions are activa‐
ted.
The steam produced dur‐
ing cooking is not suffi‐
ciently absorbed by the
hood.
Possible cause
PowerSlide operates. Two
pots are placed on the flexi‐
ble induction cooking area or
the cookware covers more
than one cooking area acti‐
vated by the function.
The fan may turn off by itself
in certain conditions, e.g.
when the room is not proper‐
ly ventilated.
The ambient temperature
surrounding the hood is too
high.
There is insufficient air circu‐
lation inside and around the
hood.
The lids on the cookware are
not properly placed.
The hood filter is oversatura‐
ted.
Remedy
Use only one pot. Refer to
"Flexible induction cooking
area".
Open the window. You may
need to install the window
switch. Refer to "Assembly". If
the window switch is already
present, make sure it was cor‐
rectly installed. Refer to the in‐
stallation booklet.
Press any symbol. The hood
operates again.
Deactivate the hob and unplug
it from the main power supply.
Wait at least 10 seconds, then
plug it in again.
Other suggestions:
Try to cool down the tempera‐
ture of the surrounding area.
Take out the hood filter and re‐
move the residual moisture
from the inside of the hood.
Refer to "Care and cleaning".
Leave the hood system to dry
for one day, then activate the
hood again.
If your cookware does not
have vented lids, make sure to
tilt the lids so that the released
steam is directed towards the
hood.
Refer to "Hints and Tips" for
information on the special
Steam Vented Lids recom‐
mended to be used with the in‐
tegrated hood.
Clean the hood filter and reset
the notification. Refer to "Care
and cleaning".