AEG CDE84779XB User Manual page 19

Place the cookware with the bottom
diameter smaller than 160 mm centrally
on a single section. You can use a
roaster pan for the Big Bridge and the
Max Bridge modes.
Place the cookware with the bottom
diameter larger than 160 mm centrally
between two sections.
Flex Bridge Standard mode
This mode is activated by default when
you activate the function. It connects the
sections into two separate cooking
areas. You can set the heat setting for
each area separately. Use the two
control bars on the left side.
100-160mm
> 160 mm
Correct cookware position:
Incorrect cookware position:
Flex Bridge Big Bridge mode
To activate the mode press
see the correct mode indicator
mode connects the three rear sections
into one cooking area. The front section
is not connected and operates as a
separate cooking zone. You can set the
heat setting for each area separately.
Use the two control bars on the left side.
Correct cookware position:
Make sure to place the cookware on the
three connected sections. If you use
cookware smaller than two sections the
control bar blinks and after 2 minutes the
zone deactivates.
ENGLISH 19
until you
. This