Viking DVA-2WA Technical Practice page 5

D. Single Line 7.5 Minute Digital Announcer
In this application, the RAD-1 Remote Access Device will answer the line and trigger the message on the DVA-2WA
to play from the beginning.
Step 1. Connect as shown.
Step 2. Turn DIP switch 5 ON.
Step 3. Program the RAD-1 as shown in the RAD-1 Technical Practice, Fax Back Document 410.
Important: The RAD-1 "Call Timer" must be programmed to a time long enough for the DVA-2WA to play its entire
message. Please refer to the RAD-1 Technical Practice, Fax Back Document 410.
C.O. Line
or Analog
PABX/KSU
Station
E. Time Activated Messages Over a Paging System
In this application, the DVA-2WA is used in conjunction with a CTG-1 Clock Controlled Tone Generator (Fax Back
Document 460) to provide time activated promotional voice messages over an existing paging system.
Optional
Background
Music Source
* Note: Up to three 8-ohm speakers may be connected (not included). Viking models 25AE Paging Horn, 30AE Ceiling
Speaker or equivalent are recommended. For more information, retrieve Fax Back Document 498.
12V DC
Adapter
included
4
Model DVA-2WA
VIKING VIKING
©
MASTER
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
MIN MAX
DIGITAL ANNOUNCER
WITH 2 WATT AMPLIFIER
1 2 3 4 ON
1
C
Model CTG-1
Clock Controlled
Tone Generator
120V AC
VIKING VIKING
MASTER
VOLUME
MIN MAX
ON
5
6
*
MODEL DVA-2WA
AUX. AUDIO
VOLUME
MIN MAX
*
S3 5 6 7 1 2 3 4 5 6
2 3 4 5 6 7
- or -
To Input of Optional Paging
MODEL DVA-2WA
©
AUX. AUDIO
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
MIN MAX
DIGITAL ANNOUNCER
WITH 2 WATT AMPLIFIER
1 2 3 4 S3 5 6 7 1 2 3 4 5 6
ON
1 2 3 4 5 6 7
C
The store will be
closing in 10 minutes.
Please bring all items
to the check out...
Amplifier
(not included)