Auxiliary Input Socket - Sangean RCR-22 Manual

3. Press the Tuning up/down button to select 'YES', and press the Select button to confirm the setting.
A full reset will be performed. The station list and presets will be set to empty. Alarms will be cancelled
and timer and sleep timer settings will be set to their default values.
RESET the radio
If your radio fails to operate correctly or some digits on the display are missing or incomplete, please
carry out the following procedure.
1. Switch off the radio.
2. With the aid of a suitable implement (e.g. paper clip), press the RESET button located in the bottom
of your radio for at least 2 seconds. This will reset the microprocessor clock time and clear all stations
stored in the preset memory.

Auxiliary input socket

A 3.5mm stereo Auxiliary Input socket is provided on the left hand side of your radio to permit an
audio signal to be fed into the unit from an external audio device such as iPod, MP3 or CD player.
1. Repeatedly press and release the Band button until AUX IN isshown.
2. Connect an external audio source (for example, iPod, MP3 or CD player) to the Auxiliary Input socket.
3. Adjust the volume setting on your iPod, MP3 or CD player to ensure an adequate signal level from
the player, and then rotate the Volume control on the radio as needed for comfortable listening.
Headphone socket
A 3.5mm Headphone socket located on the left hand side of your radio is provided for use with
headphones. Inserting a plug automatically mutes the internal loudspeaker.
Note:
You cannot hear the sound with mono earphones. This unit can only work with stereo earphones.
IMPORTANT:
Excessive sound pressure from earphones and headphones can cause hearing loss.
GB
11