GRE VCB15 Instruction Manual page 6

Electric cleaner
Hide thumbs Also See for VCB15:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
of transparent body. Then rotate 90 degrees rightly ( from open to close).
Handle assembly
lnsert the handle as shown behind big department, according to needs, looking
far what kind of convenient way to clean the wall and bottom of the POOL/
SPA, you find easier to hold the cleaner when cleaning the pool / spa wall and
bottom. lnsert the handle into the cleaner as shown until the side pin on the
handle is secured in the Handle Locking Hale on the cleaner.
To release the handle, press down the side pin and pull out the handle.
Telescopic pole assembly
lnsert the end (with one side pin)of the Pole Connector into the cleaner as
shown until its single side pin is secured in the Hand Locking Hale of the
cleaner. Slide and align the side hales of the telescopic with the side pins of
the Pole Connector.
To release the telescopic pole, press down two side simultaneously and pull
out the pole.
Suction head assembly
lnsert the Suction Head directly to the suction hale of the cleaner tightly by
hand.
In arder to have the better suction effect, please operate the electric cleaner
as the following instructions:
(1) lnsert the suction head when suction the small pebbles and leaves, as the
Picture A shows.
4

Advertisement

Table of Contents
loading

Table of Contents