Keep the surfaces of the air gap clean; even a little dirt can cause the clamp to malfunction. Use personal protection equipment systematically. All troubleshooting and metrological checks must be done by competent accredited personnel. Clamp-On Ground Tester Model 6418 GlobalTestSupply www. .com Find Quality Products Online at:...
Page 6
Save the damaged packing container to substantiate your claim. Ordering Information Clamp-On Ground Tester Model 6418......Cat. #2141.03 Includes hard carrying case, 5 calibration loop, four 1.5V AA batteries, wrist strap, Bluetooth adapter, multilingual safety sheet, Quick Start Guide, and USB drive containing User Manual.
The year blinks, indicating it can blin The instrument then displays the time format. Choose 24h or 12h (A hours reading blinks. Set it The minutes reading blinks. Set Clamp-On Ground Tester Model 6418 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
When the jaws are open, the symbol is displayed and the instrument cannot make a measurement. Clamp-On Ground Tester Model 6418 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
Page 11
For example: If R is 21 and Z effectively 0.6 the Model 6418 will read 21.6 . During the impedance measurement, the instrument emits an intermittent audible “beeping” signal. This is caused by the measurement frequency that flows in the measurement head.
3.2.3. STORAGE Number of records: 300. 3.3. INFLUENCES Z = impedance I = current = intrinsic uncertainty given in §3.2. ct = resolution given in §3.2. Clamp-On Ground Tester Model 6418 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
Page 20
I <10 A. ZxI Z x I <75 V ± ct ± ct Ground Instrument displays Z at measurement frequency 0 to 500 µH inductance (2083Hz) Clamp-On Ground Tester Model 6418 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
Page 21
> 66 dB conductor Frequency of 47 to 800 Hz 1 the leakage 0.5 ± ct 1 ± ct current 1: For the whole current measurement range Clamp-On Ground Tester Model 6418 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
The instrument is compliant with standard IEC 61010-1 and IEC 61010- 2-032, 100V category IV or 150V category III. 3.8. ELECTROMAGNETIC COMPATIBILITY (EMC) The instrument is compliant with standard IEC 61326-1. Clamp-On Ground Tester Model 6418 GlobalTestSupply www. .com Find Quality Products Online at:...
Disconnect everything connected to the instrument and set the switch to OFF. Turn the instrument over and unscrew the 2 captive screws securing the battery compartment cover. Clamp-On Ground Tester Model 6418 GlobalTestSupply www. .com Find Quality Products Online at:...
Page 25
Instrument date and time settings are saved for several minutes, long enough for you to change the batteries. If, however, the date and time are lost, the instrument will prompt you to reset them when it is turned ON (see §1.4). Clamp-On Ground Tester Model 6418 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
Caution: To protect yourself against in-transit loss, we recommend you insure your returned material. NOTE: You must obtain a CSA# before returning any instrument. Clamp-On Ground Tester Model 6418 GlobalTestSupply www. .com Find Quality Products Online at:...
Need help?
Do you have a question about the 6418 and is the answer not in the manual?
Questions and answers