1. Manuals
  2. Brands
  3. decoflame Manuals
  4. Indoor Fireplace
  5. DENVER F6
  6. User manual

decoflame DENVER F6 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
UK
USER MANUAL
DENVER F6™

Advertisement

Table of Contents
loading

Related Manuals for decoflame DENVER F6

Summary of Contents for decoflame DENVER F6

  • Page 1 USER MANUAL DENVER F6™...

  • Page 2: Table Of Contents

    IT IS IMPERATIVE THAT YOU READ THE ENTIRE INSTALLATION AND OPERATING INSTRUCTIONS AND ADHERE TO THE SAFETY MEASURES DESCRIBED IN THIS DOCUMENT. DECOFLAME CANNOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED AS A RESULT OF NON-ADHERANCE TO THESE INSTRUCTIONS. KEEP THE MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.

  • Page 3: Packaging

    If any questions or doubts please contact Decoflame or local retailer. It is very IMPORTANT to keep the wooden crate or the cardboard, in case the fireplace will need to be returned to Decoflame for service DO NOT DO NOT open the box or wooden crate with sharp objects.

  • Page 4: Content Of The Box

    All Decoflame fireplaces are designed, manufactured and quality-tested in Denmark with the highest product safety and user- friendliness in mind. Denver F6 with CEVB Technology (Controlled Ethanol Vapour Burning Technology) can be operated via control panel. Alternatively, the burner can be operated with a remote controller or with Bluetooth/Decoflame App.

  • Page 5: Installation

    Please read and follow the detailed installation instructions on your technical drawing, which have been compiled for your Decoflame bio fireplace. In here you will find all dimensions and a step-by-step installation guide. It is only advisable to install your Decoflame bio fireplace, after all craft work in the room has been completed, to avoid damages to the bio fireplace, casing or glass.

  • Page 6: Preperation Of Wall

    5.2. PREPERATION OF WALL The fireplace hole must be constructed in a The fireplace hole must be hermetically Decoflame recommends that you do NOT non-flammable material with regard to DS sealed in both top and sides, so that false joint around the casing of the fireplace.

  • Page 7: Recess In Cavity Wall

    The cut-out must be made according to the handedout drawings. Brick wall is considered to be of non-flammable material. IN GENERAL Make sure the notches in the wall and the support of the left and right sides under the base plate of your Denver F6 burner, is level and all corners of cutouts are at a 90 degree angle.
  • Page 8 Min. 300 mm Længde: Kasseindsats + 20 mm Min. 190mm Max.210mm Denver F6 can be immersed in a hole in a half wall or similar. It 3-benet is important that the hole is a minimum of 190mm in width and a maximum of 210mm.

  • Page 9: Placement Under Tv Screen

    TV screens or valuable paintings above the fireplace as the upwards drifting warm air might damage those. Should you still want to create a setting incorporating a TV screens above the fireplace, please follow the instructions below or ask Decoflame for further advice. ↕ Min. 800mm Min.

  • Page 10: Burner Installation Process

    When the biofireplace is positioned as desired, turn on the power connection using the button that unlocks the fuel cover. > STEP 4: Carefully fit the glass screen(s) by inserting the glass holders into the holes in the top plate. Avoid scratching the top plate. Copyright Decoflame ApS.

  • Page 11: Operating Instructions

    NOTE: The glowing filament must not be touched when it is lit as it is hot. During cleaning - do not touch it as it is extremely fragile ONLY ADuLTs MAY OPeRATe The eLecTRONIcs Of The DecOfLAMe DeNveR f6™. > TURN ON...

  • Page 12: Operating Control Panel

    DO NOT USE other fuel, other materials, lower quality bioethanol, or bioethanol containing oils and fragrances, as this will void your warranty. Bioethanol can be bought in specialist shops or on the internet - feel free to ask Decoflame for advice and recom- mendations.

  • Page 13: App Control

    Before starting to clean the fireplace, make sure it has cooled down and it is switched off completely. The glass components of your Decoflame fireplace are made of tempered heat-resistant glass. Those glass parts as well as any metal parts which are exposed to the heat of the fire might slightly change color or structure. This is to be considered normal wear and tear and does not constitute a product flaw or fault.

  • Page 14: Safety Advice

    If it is assessed that the fire is out of control, contact the fire authorities immediately. 10. EMPTYING THE FUEL TANK It is very important that the fuel tank is empty if the biofireplace has to be moved or if it has to be sent to Decoflame ApS for additional technical assistance.

  • Page 15: Bioethanol

    13. DISPOSAL AND RECYCLING The made to measure Decoflame bioethanol fireplace is made of aluminium, stainless steel, glass(es), copper, plastic and electronic components. If you wish to dispose of the appliance, please adhere to the regional rules and regulations.
  • Page 16 Follow the Fire Authorities and national and local requirements regarding bioethanol fireplaces. Subject to typographical errors and technical errors. Decoflame ApS reserves the right to make changes without notice. We refer to Decoflame’s General Terms of Sale and Delivery. V0123...

Table of Contents