medemagroup MC 1124 Adult Service Manual page 59

Medema A/S
Service manual 2433-2033-S
Calf pads - Angle
You set how tight the leg
pad should be to tilt, by
loosening or tightening
this pin bolt.
Calf pads - up/down
Loosen the screw pointed
out in the picture beside.
Adjust and tighten again.
Travel: 210 mm from top
position to lowest position.
Calf pads in/out
Loosen the screw indicat-
ed in the adjacent image.
Adjust and tighten again.
Travel: 40 mm from inner
position to outer position.
59 of 120
Lowest Highest
Version 2.0.3/2023