1. Manuals
  2. Brands
  3. medemagroup Manuals
  4. Wheelchair
  5. MC Concept 1122
  6. User manual

medemagroup MC Concept 1122 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
medemagroup
GB
P9-0222-B ver. 1.0.9 - 2015

Advertisement

Table of Contents
loading

Related Manuals for medemagroup MC Concept 1122

Summary of Contents for medemagroup MC Concept 1122

  • Page 1 P9-0222-B ver. 1.0.9 - 2015...
  • Page 2 Medema A/S Serial number: ______________________________ Delivery date: ________________ Year 20______ This vehicle was supplied by: Date: User guide P9-0222-B 2 of 64 Version 1.0.9/2015...

  • Page 3: Table Of Contents

    Joystick parts ................ 12 Operating ................12 Error Code ................18 Safety check................19 Programming ................. 20 Serial number................. 21 Driving the MC Concept 1122 ..........22 Brakes..................26 Fuses ..................27 Batteries ................. 28 Battery disposal..............28 Charging ................. 29 General care ................
  • Page 4 Medema A/S User guide P9-0222-B 4 of 64 Version 1.0.9/2015...

  • Page 5: Symbols

    For safety reasons the vehicle must not be lent to persons who are not completely familiar with it. The vehicle is designed for one person only. The MC Concept 1122 has been designed for persons weighing up to 150 kg. Joystick...

  • Page 6: Seat And Backrest

    Medema A/S Seat and backrest The cover of the seat and backrest can be washed in the washing machine. ALWAYS follow the washing instructions on the back of the seat pad / backrest. Flame resistance The Mini Crosser seat’s flame resistance has been tested in accordance with ISO 7176-16.

  • Page 7: Help For The Visually Impaired

    Medema A/S Help for the visually impaired If you have difficulty reading small print in the user manual, we recommend that you visit our website, where you can read this manual in PDF format. You can enlarge the PDF manual on your PC monitor to suit your needs and preferences.

  • Page 8: Introduction

    If you are a new user, you should pay particular attention to the section “Driving the MC Concept”. The MC Concept 1122 is designed to stay safe to use for at least 10 years, up to a maximum of 5,000 hours, providing it has service and safety inspections every year, which is equivalent to around 500 operating hours.

  • Page 9: Declaration Of Conformity

    Medema A/S Declaration of conformity Medema Production A/S hereby declares that: Machine: Use: (Prescribed use in User Manual) Model No: 1122 Complies with the Medical Device Directive 93/42/EEC We, the manufacturer: The product is made in accordance with the harmonized standard EN 12184 - Electrically powered wheelchairs, scooters Medema Production A/S and their chargers.

  • Page 10: Medema A/S Warranty

    Medema A/S Medema A/S Warranty There is a 2-year warranty, with the exception of worn parts such as tires, hoses, fuses, light bulbs, bushings and brake pads. If you want to make a claim for a part under the warranty, it must be intact.

  • Page 11: Part Names

    Medema A/S Part names The part names given below refer to the descriptions later in the instruction manual. Headrest Adjusting the headrest Control panel Joystick Armrest Swing-away release Charging socket Release for leg supports Indicators (Optional extra) Calf pad adjustment Eye for restraints Footplate or footrests Eye for restraints...

  • Page 12: Introduction Dx2

    Medema A/S Introduction DX2 DX2 is the first in a new generation of joysticks to control the electric wheelchair. With its large color LCD screen and its logical icon built menu structure, it directs the user to the target. Joystick parts Dynamic DX2 AJR Start/stop-button Indicator Right...
  • Page 13 Medema A/S Clock on/off Press arrow up/down or joystick (push forward) until the above icon is showed in the center of the screen. Use ”Select” to switch  between X and Accept by pressing the arrow up/down button. Set the clock Press arrow up / down until the clock appears in the center.
  • Page 14 Medema A/S Set Speed When you turn the joystick on, the image shown below will be presented in the display. The number in the centre shows the speed you have chosen as max speed. Change the Speed by selecting the plus / minus key. Maximum speed is 5, lowest is 1. Chosen speed Select Find the features in the bottom with the “Select”...
  • Page 15 Medema A/S Function Icon Seat angle (Tilt) Backrest angle Seat height Left footrest Right footrest Footrest both Only the available option will be displayed. User guide P9-0222-B 15 of 64 Version 1.0.9/2015...
  • Page 16 Medema A/S Light on / off Push the arrow up / down until the image for light is shown in the centre. Push the joystick forward to turn the light on. And again to turn of the light. Push the joystick back to activate the hazard warning lights. Push the joystick back again to turn it of.
  • Page 17 Medema A/S Setting the display environment Use the arrows up /down until “day / night” icon i shown in the centre. Push the joystick forward to enter settings. The image below will show. Exit / Cancel Exit / Cancel Setting Result 1 - Inoor The display will show a bright background color.

  • Page 18: Error Code

    Medema A/S To lock the DX system Press the on / off button, for 4 sec. while the system is turned on. The system will now shut down in locked condition. To unlock the DX system Press the on / off button. The system will show a lock in the display. Press the horn twice within 10 seconds.

  • Page 19: Safety Check

    Medema A/S Safety check Daily safety check: The electronic system has an integrated safety check which runs up to 100 times per minute. To supplement this check, you should carry out the following regular checks. • Switch off the electronic system (no lights in the display) •...

  • Page 20: Programming

    Medema A/S Yearly The MC Concept 1122 is designed to stay safe to use for at least 10 years, up to a maximum of 5,000 hours, providing it has service and safety inspections every year, which is equivalent to around 500 operating hours. The service must be carried out either by Medema Danmark A/S or an authorised workshop.

  • Page 21: Serial Number

    Medema A/S Serial number All wheelchairs have a serial number plate showing the year of production, month and serial number. The same serial number can also be found on the front of the User Manual. Please quote this number when making inquiries about servicing, spare parts, etc.

  • Page 22: Driving The Mc Concept 1122

    Medema A/S Driving the MC Concept 1122 MC Concept is a modern device, specially developed to help you achieve maximum mobility. Before getting on or off the vehicle, you must check the following: • That the wheelchair is switched off.
  • Page 23 Medema A/S Changes of level Never attempt to climb onto raised objects or kerbs higher than 7 cm. Always approach changes of level head on, with the front and back wheels moving in a straight line. (See below.) This reduces the possibility of tipping. Note! If your MC Concept/vehicle is fitted with a docking system from Dahl Engineering, note that the clearance is reduced to 5.5 cm.
  • Page 24 Medema A/S 10 tips for driving the MC Concept: • Reduce the speed when turning corners and going downhill. • Reduce the speed when driving on inclines. Maximum incline: 6° = 10% • Reduce the speed when driving on a sideways incline. Maximum sideways incline: 6°...
  • Page 25 Electromagnetic compatibility (EMC) The MC Concept 1122 satisfies the requirements for the use of wheelchairs in an environment with electromagnetic noise. There may, however, be rare situations in which electromagnetic noise can affect the MC Concept 1122.

  • Page 26: Brakes

    Medema A/S Brakes The MC Concept is equipped with two sets of brakes: The motor brake and the parking brake. Motor braking: When you drive downhill, the control unit of the MC Concept applies the motor brake. Parking brake: When the vehicle is stationary and the joystick is not moved, a magnetic brake is automatically applied to each drive unit.

  • Page 27: Fuses

    Medema A/S Fuses On the left of the MC Concept behind the seat, there is a automatic fuse protecting the battery circuit. The fuse is white. If it pops out, you can push it back in again after a few minutes. If it immediately pops out again, contact your authorised dealer.

  • Page 28: Batteries

    Medema A/S Batteries The battery indicator shows how much power is available to the wheelchair. • Red, amber and green indicate that the batteries are fully charged. • Red and amber indicate that the batteries will soon need recharging. • Red indicates that the batteries need to be recharged as soon as possible, otherwise the wheelchair will cut out.

  • Page 29: Charging

    Medema A/S Charging Charging Plug the cable into the control box on the wheelchair. Plug the charger into the outlet or switch it on. Use the indicator lights on the charger to check that charging has started. When charging has finished, switch off or unplug the charger, and then remove the charger cable from the control box.

  • Page 30: General Care

    Medema A/S General care If you get food or drink, etc. on the control unit, you should wipe it with a damp cloth. You must only use a damp cloth to clean the MC Concept. Note! Using a high-pressure cleaner or hose may damage the wheelchair’s electronic system.

  • Page 31: Storage

    For long-term storage we recommend covering the MC Concept 1122 to protect it from dust, rain and sunlight. Transporting by motor vehicle The MC Concept 1122 must ALWAYS be secured while being transported. To lift the wheelchair, use the pivot wheels at the front and back.

  • Page 32: Transporting By Plane

    Medema A/S Transporting by plane To transport the MC Concept by plane, the airlines require: • the batteries to be aircraft approved • the air to be let out of the tyres • the battery leads to be disconnected (not always, but frequently). A main switch can be fitted (optional extra).

  • Page 33: Changing The Wheels

    Medema A/S Changing the wheels If you get a puncture in one of the pneumatic tyres or if a tyre is so badly worn that it needs to be replaced, follow the instructions below. Tyres and inner tubes can be purchased from the authorised dealer who supplied the MC Concept.
  • Page 34 Medema A/S Replace or repair the hose. Make sure there is no dirt or foreign objects in the tire before the the hose is in place. Pump in some air, but don’t fill it completely yet. Please be aware to placing the valve in the prepared holes.
  • Page 35 Medema A/S Important! When mounting the rim, all skrews must have a drop of Loctite 243. Mount the rim whitout tightening the screws. Check that the hose dosen’t get between the rim parts. Keep the rim in place while tightening the screws.
  • Page 36 Medema A/S Pump the wheel to the right pressure. (see technical data) Pivot- and anti-tilt wheel Pivot wheel / anti-tilt wheel Undo the central nut. Remove the bolt that goes through the axle. The wheel is now removable. User guide P9-0222-B 36 of 64 Version 1.0.9/2015...

  • Page 37: Changing The Battery

    Medema A/S Changing the battery This is how to remove the batteries. Always switch off the power on the MC Concept before starting work. Raise the bellows. If the MC Concept has leg supports, these must also be removed along with their plugs. These are on the right and left of the seat.
  • Page 38 Medema A/S Electric leg supports Push the catch down. Then twist the leg support out to the side. You will now be able to lift it off. There are no external fuses that need to be removed. Electric central footplate Remove the plug under the seat on the right.
  • Page 39 Medema A/S • Undo this plug. • Remove the battery strap. • Remove the plus and minus terminals from both batteries. The batteries can now be replaced. Mount the new batteries in reverse order. Take care not to trap any cables when fitting the new batteries.

  • Page 40: Changing Lights

    Medema A/S Changing lights In case one of the lights stop working: • Check the power supply. • Replace light module. * For mounting on the other side: Mount bracket inverted. REMEMBER! Red light should turn backward. Art. No. Description CR-5-0000 Blink and position lights, LED, complete Note! Lights are extra.

  • Page 41: Securing To Vehicle Floor With Belts

    Medema A/S Securing to vehicle floor with belts Dahl Engineering belt set for securing in motor vehicles. Item no. C2-0242 ALWAYS use four belts at the back and two at the front. The belts must always be attached to approved fittings in the vehicle and the four eyes welded to the MC Concept.
  • Page 42 Medema A/S Attachment point Attachment point 25˚ 10˚ Min. 150 mm Min. 150 mm on floor Centre line on floor User guide P9-0222-B 42 of 64 Version 1.0.9/2015...

  • Page 43: Footplate/Footrest

    Medema A/S Footplate/footrest Manual central footplate You can adjust the footplate forwards and back. Undo the two screws indicated on both sides. REMEMBER to tighten again on both sides. To adjust the footplate to a comfortable angle for the legs, undo the screws shown here.
  • Page 44 Medema A/S To adjust the footplate up and down, undo the screws shown here. You can now adjust the footplate to the required height. REMEMBER to tighten the screws properly again. Electric central footrest You can adjust the footplate forwards and back.
  • Page 45 Medema A/S Length adjustment: Switch to the seat functions setting by pressing the up/ down button. Toggle between the settings with the Select button. The icon for the left leg support starts flashing. Move the joystick up/down to change the length. To adjust the angle: Use Select button until the icon for the right leg...
  • Page 46 Medema A/S Manual footrests You can adjust the footrests forwards and back. This can be done by undoing the two screws indicated. REMEMBER to tighten the screws again. To adjust the footplate angle, loosen the clip. Adjust and tighten the clip again.
  • Page 47 Medema A/S The footrests can be swung to the side. To do this, press your finger on the release handle. No tools are needed. Adjusting calf pads up/ down and the angle by loosening these two screws. Tighten again after adjusting. Electric footrests You can adjust the footrests forwards and...
  • Page 48 Medema A/S Adjusting the height and angle using the joystick: Switch to the seat functions setting by pressing the up/ down button. Toggle between the settings with the Select button. The icon for the left leg support starts flashing, and you can adjust it by moving the joystick up and down.
  • Page 49 Medema A/S You can adjust the height manually by undoing these screws, adjusting, then tightening again. You can adjust the angle of the footplates by undoing this screw, adjusting, then tightening again. Electric central footrest - with split footrests Normal start position. Legs support vertical down.
  • Page 50 Medema A/S Calf pads: Innermost position. Calf pads: Outermost position. Difference of 50 mm from the innermost to the outermost position Hole pattern. Footplate can be moved, twice, 25 mm, on each. (50 mm total) Right and left footrest, can be adjusted manualy within a length of 160 mm User guide P9-0222-B 50 of 64...
  • Page 51 Medema A/S The footrests are here identical in top position Calf pads can be moved in 3 directions. A Tilts B 130 mm C 50 mm Footrests angle can be adjusted individually, using the screw as seen on the next picture. The screw as mentioned in the picture before this User guide P9-0222-B...
  • Page 52 Medema A/S Footplate. Left and right. Footplate with: Width extension kit. Footplate with: Bell shape length extension kit Footplate with: Width and length extension kit User guide P9-0222-B 52 of 64 Version 1.0.9/2015...

  • Page 53: Introduction To Ergo Lux

    Medema A/S Connection of footplates: Right and left base plate is screwed together with the connecting piece so that they now act as one large foot plate. Introduction to Ergo Lux Armrest angle You can use the adjusting screw to alter the angle of the armrest by about 15°.

  • Page 54: Adjusting The Headrest

    Medema A/S Adjusting the headrest Height adjustment Adjustment forward/back: Headrest angle Adjusting the headrest Swing-away fitting Release lever The MC Concept can be equipped with a swing-away fitting. To use it, push the release handle and you can move the joystick to the side.

  • Page 55: Adjusting The Spinalus Backrest

    Medema A/S Adjusting the Spinalus backrest Easy access to adjustments through four large zips. The adjustments are made just behind the zips. To set the shape of the backrest, undo the four screws. All bolts on the Spinalus can be undone and adjusted for the user.

  • Page 56: Adjusting The Ion Seat

    Medema A/S Adjusting the ION seat Adjust the angle of the back by pulling here. Move the back to a new posistion. It has to click in place in both sides to be locked in place. ® IX. Tension Adjustable Seat Back The back rest is easily 16"W x 22”H 17"W x 22”H...

  • Page 57: Manual Height Adjustment Of The Seat

    Medema A/S Manual height adjustment of the seat. MC 1122 can be equipped with a seat without electric hoist. There is in these models possibility for adjusting the seat 40 mm in height. The seat is fitted with 8 bolts which are placed in pairs in each corner of the seat frame.

  • Page 58: Dahl Docking System

    Medema A/S DAHL docking system Dahl Engineering’s newly developed electric Docking System sets completely new standards of flexibility and safety for wheelchair users. ocking System It is the only system to be tested and TÜV approved under EU safety directives for passenger vehicles (M1), with electric ocking System mobility wheelchairs weighing 147 kg and using the built-in lap ocking System...

  • Page 59: Reconditioning

    Medema A/S Reconditioning When preparing a MC Concept for a new user it is important to check the following. • Transaxle - clean and check for leaks. Check bearings. • Tyre pressure (see technical data). • Condition of tyres (check for cracks and abnormal wear). •...
  • Page 60 Medema A/S Medema Production A/S Enggårdvej 7 7400 Herning Tilmeldte produktkategorier 8. Medicinsk udstyr User guide P9-0222-B 60 of 64 Version 1.0.9/2015...

  • Page 61: Technical Data

    Medema A/S Technical data Wheel sizes: Safety wheels: front Ø145 mm / solid Central wheels: middle Ø350 mm / pneumatic Pivot wheels: back Ø145 mm / solid General information: Total length 90 cm Total width 62 cm Weight incl. batteries, Spinalus seat (45 cm), 157 kg electric leg supports, headrest, swing away and joystick.
  • Page 62 Medema A/S Wheel sizes: Safety wheels: front Ø145 mm / solid Central wheels: middle Ø350 mm / pneumatic Pivot wheels: back Ø145 mm / solid Height of backrest Spinalus 36, 48, 56, cm Angle of backrest (spinalus) (***) From -5° to +40° Hoist/tilt Raise/lower 30 cm...
  • Page 63 Medema A/S User guide P9-0222-B 63 of 64 Version 1.0.9/2015...
  • Page 64 medemagroup...

Table of Contents