LSI-99-183/OTB OB/rev.02A
Dry the test area with a soft, dry
tissue or cloth. Remove any lint.
Step 4: Replace the Test Strip
Holder.
Hook the bottom of the test strip
holder onto the square notch on
the meter.
10/11/99 9:18 AM
Page 77
Press down on the raised dots of the
test strip holder until it snaps firmly
into place. Press forward on the base
of the test strip holder to be sure it
is properly in place. You are now
ready to do a check strip test. If the
check strip will not slide into the
test strip holder, repeat this step.
77
LifeScan, Inc. v. Facet Technologies LLC
IPR2023-00713 - U.S. Patent No. 8,840,635
M
C
LifeScan, Inc.. Ex. 1110 - Page 85