Lifescan ONE TOUCH BASIC Owner's Booklet page 27

LSI-99-183/OTB OB/rev.02A
Do a control solution test:
For practice, before testing your
blood with the ONE TOUCH
BASIC Meter for the first time
®
When you begin using a new vial
of test strips
At least once a week
Whenever you suspect that the
meter or test strips are not
working properly
When your blood glucose test
results are not consistent with
how you feel, or when you think
your results are not accurate
If you drop the meter
If you get the meter wet
10/11/99 9:18 AM Page 19
The control solution test procedure is
just like blood glucose testing, except
that you use ONE TOUCH
®
Control Solution instead of blood.
Control solution test tips
Shake the control solution vial
thoroughly before using.
If there are any bubbles on the top
of the vial, wipe them off with a
clean tissue.
Apply a full drop of control
solution to the center of the test
spot and cover it completely. Do
not dab, wipe, or smear control
solution on the test spot.
Avoid contaminating the control
solution. Do not touch the test
spot with the tip of the vial.
19
LifeScan, Inc. v. Facet Technologies LLC
IPR2023-00713 - U.S. Patent No. 8,840,635
Normal
®
LifeScan, Inc.. Ex. 1110 - Page 27