Charging Your Ageloc® Wellspa Io - ageLOC WellSpa io User Manual

CHARGING YOUR AGELOC® WELLSPA iO™ DEVICE
The battery indicator will turn amber when the battery is low.
• Before charging, make sure the device and charger are
completely dry.
• Plug the charger into a USB adapter and then into a wall
outlet. Place the device on the charger to begin charging.
6
• While the device charges, the battery indicator breathes green.
• When the device is fully charged, the battery indicator will
turn solid green.
• Do not keep the charger plugged in when not in use or after
device has reached full charge.
NOTE
When the battery is critically low, the battery indicator will flash amber, and the
device will turn off when the user attempts to turn it on. This indicates there is not
enough battery remaining to perform a session.
If there are no indicator lights, charge the device. Indicator lights will turn on once
the device is charged.
Our rechargeable battery helps reduce waste.
We invite you to learn more about our sustainability
initiatives by visiting nuskin.com/sustainability.