Charging Your Ageloc® Lumispa® Io - ageLOC LumiSpa iO User Manual

CHARGING YOUR AGELOC® LUMISPA® iO
1
NOTE: If the battery is low, the bottom lights will display amber after a treatment.
4
2272_94514492-1_ageLOC_LumiSpa_iO_UserManual.indd 4 2272_94514492-1_ageLOC_LumiSpa_iO_UserManual.indd 4
• Prior to placing the ageLOC
LumiSpa iO magnetic charger
make sure
on your device,
your device is completely dry.
• Place the magnetic charger on
the bottom front portion of the
device just below the LED
display. The charger will
magnetically snap into place
when positioned correctly. Plug
the USB cable on the magnetic
charger into a USB power brick
and plug into an outlet until
device is fully charged. When
used as recommended, the
device will maintain a charge
for at least a week.
• While the ageLOC LumiSpa
iO is charging, the front
indicator lights glow starting
from the bottom and moving to
the top. When the device is fully
charged, lights turn green and
remain lit.
5/31/22 4:01 P 5/31/22 4:01 P