Using Your Ageloc Wellspa Io - ageLOC WellSpa io User Manual

USING YOUR AGELOC® WELLSPA iO™ DEVICE SYSTEM
You may use your ageLOC WellSpa iO device system up to 5 minutes, three times per week to daily, on each body area.
STEP 1. APPLY AGELOC BODY SERUM OR AGELOC BODY
ACTIVATING GEL
Smooth your serum or gel liberally on the area to be treated,
avoiding face, neck, chest, and groin. If you plan to treat more
than one area, only apply the product to the area to be
immediately treated.
STEP 2. STARTING A SESSION
Press the power button to turn on the device. All five indicator
lights will illuminate the first time you power on. The number
of illuminated indicator lights indicates the session time. Each
time you press the Power button, you select a new time. Press
the Power button again until you have selected your preferred
time from 1–5 minutes. Your device will remember your setting for
the next session. Place the device on the area of your skin where
you ' ve applied the serum or gel. The device will emit a tone,
and your session will start automatically. Begin a new session
for each treatment area.
8
STEP 3. DURING THE SESSION
Lightly glide the device over your skin. Take care to avoid
sensitive areas. Each minute will be counted down by the
sound of a tone and an indicator light turning off.
• A lack of product or a loss of contact with your skin will interrupt
the current causing WellSpa iO to pause and emit a tone.
Resume by placing the metallic nodes on your skin and/or
applying more product as needed to ensure a smooth glide.
• The device will emit an alert tone if you are moving the
device too quickly.
• To turn the device off at any time, simply press and hold
the Power button until the lights turn off.