Advertisement
STEP 12
Assemble The Nesting Boxes
You will need to assemble two boxes -one for left wall and one for right wall.
12.1 Cut 5/8" plywood for the box according to the drawing.
You will need to cut two 1' x 4' sheets for the top and bottom planes, one 1'-4" x 4' sheet for the back wall
and five 1' x 1'-2 3/4" sheets for the side and inner partitions.
12.2 Using 1 1/2" x 3 1/2" pressure-treated lumber, assemble two hangers.
You will need two boards cut to 2', two boards cut to 1' and two boards cut to 1'-7".
12.3 Fix the hangers to the wall with the help of 5" wood screws according to the drawing below.
Make sure there is a stud under the plywood in the installation place.
12.4 Put the box on the hangers and fix it with 1" wood screws.
12.5 Using 3/4" x 2 1/2" and 3/4" x 5 1/2" pressure-treated lumber, provide the front girt and roost.
You will need two boards cut to 4'.
Advertisement
