STEP 11
Assemble The Litter Tray
You will need to assemble two trays.
11.1 Assemble the litter tray using 3/4" x 2 1/2" and 3/4" x 3 1/2" pressure-treated material and
5/8" plywood. You will need two boards cut to 5'-5", one board cut to 3'-4 1/4" and one board
cut to 3'-5". Assemble the frame and put one 3'-4 1/4" x 5'-5 3/4" sheet of plywood at the bottom.
Finish the tray installation by attaching two 6" door pulls.
11.2 Using 1 1/2" x 1 1/2" and 3/4" x 5 1/2" pressure-treated lumber, assemble the litter tray insert.
You will need three boards cut to 5'-1". Assemble the insert according to the drawings below.
Litter tray_2
Litter tray insert
Litter tray_1