Pioneer GM-2000A Owner's Manual page 5

Connecting Leads (Supplied)
Commectna the Continuous Power Supply Lead (Orange)
Fusjble link
Passenger compartment —| —~»> Engine compartment
| : Cc ll th
Continuous power /
Fit the rubber
ether iiss ead
grommet into
the hole in
the car body.
Drill a hole in
the car body.
CAUTION
e The fusible link is a safety device
DO NOT DEFEAT ITS PURPOSE
e Should the fusible link blow
am
2.
Q.
oe
ED
4
Connecting Speaker Leads
This amplifier has a mode select switch to select two-channel out-
put (stereo) or one-channel output (mono). The speaker leads
must be connected to suit the mode selected. Connect the speak-
er jeads to the output terminals of the amplifier as shown in Fig. 1
and 2, paying attention to the polarities (+ and -) and lead colors.
When two channels (stereo) are used
e Set the mode select switch to the 2CH position.
Black,cover
Fig. 1