Trackmaster TMX22 Owner's Service Manual page 20

CAUTION
April 20, 2000
10.
Plug the treadmill into an appropriate power outlet.
Turn the treadmill's master power switch to the ON position.
The controller should now be illuminated. The treadmill will not start unless the mini-
mum speed is displayed in the Speed display window.
Straddle the running belt, grip the safety rails, and press the Start key.
Dismount the treadmill, leaving the belt running at minimum speed. Keep hands, feet,
and clothing away from the moving parts.
Examine the position of the running belt on the rear roller; it should lie on the approx-
imate center of the roller. If so, accelerate the belt to 6 mph and ensure that the belt is
tracking in the approximate center of the rear roller. If it is not centered, slow the belt
to the minimum speed and stop the treadmill by pressing the Stop key (see "Running
Belt Adjustment" on page 9-3).
If necessary, adjust the belt with a 1/4-in. Allen wrench.
If the belt is tracking properly, slow the treadmill to minimum speed and stop it by
pressing the Stop key.
While straddling the belt, press the Start key to start the belt. Set the speed to mini-
mum.
Ensure that the minimum speed is displayed in the window. While gripping the safety
rails, put one foot gently on the moving belt and allow the foot to move back with the
belt. Repeat the action to get the feel of the belt movement. When comfortable, step
briskly onto the moving belt while gripping the safety rails. Walk normally, keeping
TMX22 Owners Manual 7-1