Table of Contents
Advertisement
Smartphones/WLAN
WLAN connection gets interrupted
Cannot pair with a mobile device
Mobile device connection/image transfer not
working
Camera does not appear on the WLAN
configuration screen of the mobile device
Print
No image will be printed
Colors of the print are too faint
Error message is displayed during printing
Camera deactivates when it overheats (safety feature)
The camera was already paired with the mobile device
The mobile device is too far away
Interference from other devices in the vicinity, e.g. other
smartphones or a microwave oven
Interference from multiple mobile devices in the vicinity
Mobile device is currently connected to another device
Mobile device does not recognize camera
No image is selected
No film pack inserted
Film pack used up
is selected in menu item "print mode"
Natural
Film cover of the film pack was not ejected correctly
Allow camera to cool down
Delete the camera registration from the Bluetooth settings
in the mobile device and repeat pairing process
Bring the devices closer to each other
Increase distance to interfering devices
Re-establish the connection/disconnect other mobile
devices
Check connection
Switch the WLAN function of the mobile device off and on
again
Select the image for printing
Insert a film pack
Select
Rich
Remove the film pack and adjust the tab of the film cover.
Do not pull out film cover!
81
FAQ
Advertisement
Table of Contents
