Table of Contents
Advertisement
The time and date stamp on images are
incorrect
The time and date stamp on images are
unwanted
Images are damaged or missing
Image quality
The image is too bright
Unnatural colors
Round white stains, similar to soap bubbles
Images are out of focus
Images are overexposed
Out of focus/picture stabilizer not functioning
Horizontal stripes
Unnatural colors and brightness
No images are displayed
Images cannot be displayed
80
FAQ
Time settings are incorrect
Setting was ignored
The memory card was removed while the readiness
indicator was flashing
The memory card formatting is faulty or the card is
damaged
Light sensor was covered during shooting
White balance not or incorrectly set
Flash photography in a very dark environment: reflections
of dust particles
Lens is dirty
Lens is obstructed
Camera moved during shooting
Flash is activated in bright surroundings
Strong light source in the image
(Half) backlight falling into the lens (also from light sources
outside the image range)
Shooting at a dark location without flash
Picture was taken with electronic shutter under a light
source like a fluorescent lamp
Shooting in artificial light or extreme brightness
No memory card inserted
The photos were taken with another camera
File name was changed on a PC
Set the time correctly
Caution: Time settings will be lost if the camera is not
used/remains in storage with a depleted battery over an
extended period of time
Cannot be removed in retrospect
Deactivate the function as needed
Never remove the memory card while the readiness
indicator is flashing. Charge the battery.
Reformat the memory card
(Caution: Loss of data!)
Make sure that the light sensor is not obstructed
Adjust white balance to light source or adjust manually
Deactivate the flash
Clean the lens
Make sure that lens is unobstructed
Use flash
Mount the camera on a tripod
Change the flash mode
Avoid strong light sources in the image
Use the lens hood or change to another object
Use a tripod
Try shorter shutter speeds
Set white balance or select correct lighting presets
Insert a memory card
Transfer the files to another device to view them
Use suitable software for file transfers from a PC to the
camera
Advertisement
Table of Contents
