UPDATING THE CAMERA FIRMWARE
▸
Preparation
▸
Select
in the capture menu
Firmware Update
▸
Select
Confirm
• A prompt with information about the camera is displayed.
• The update will start automatically.
• The status LED will flash during this process.
• Once the process has completed successfully, a relevant on-
screen message and prompt to restart the device will appear
on screen.
▸
Switch the camera off and on again
Notes
• Date & time, as well as the preferred language will have to be
set up again after the restart. Relevant prompts will appear on
screen.
• These settings will be applied automatically if the update is load-
ed via Leica FOTOS.
OTHER FUNCTIONS ▸ FIRMWARE UPDATES
71