Table of Contents
Advertisement
Flash won't fire
The flash does not fully illuminate the object
The camera won't release/shutter button is
deactivated/shooting not passible
No face detection/faces are not recognized
The image on the LCD panel displays lots of
noise
Image storage takes a long time
Review and photo management
The time and date settings are incorrect or are
not displayed
The flash cannot be used with the current settings
Battery is depleted
Pressing the shutter button while flash is still loading
Image effect active
Object is outside the flash range
Flash is covered
Memory card is full
The memory card is not formatted
The memory card is write protected
Dirt on the memory card contacts
The memory card is damaged
The camera has switched off automatically (
)
Off
Image data is being written to the memory card and the
cache is full
Battery is depleted
Camera is processing a image
Face is covered (sunglasses, hat, long hair, etc.)
Face takes up to little space in the picture composition
Face is tilted or horizontal
Camera not held straight
Face is insufficiently lit
The incorrectly selected object is a face
Light enhancement function of the LCD panel in dark
surroundings
Noise reduction is activated for long-term exposures
The memory card inserted is slow
The camera has not been in use for an extended period of
time (the battery was removed)
Refer to the list of flash function-compatible settings
Charge or replace the battery
Wait until the flash is loaded
Change the setting
Move object into flash range
Make sure the flash unit is not covered by your finger or
some object
Replace the memory card
Reformat the memory card
(Caution: Loss of data!)
Deactivate the write protection on the memory card (small
lever on the side of the memory card)
Clean the contacts with a soft cotton or linen cloth
Replace the memory card
Switch the camera on again
Auto Power
deactivate auto shutdown as needed
Wait
Charge or replace the battery
Wait
Remove distracting objects
Change image composition
Keep face straight
Hold camera straight
Use flash, improve illumination
Deactivate face detection
Not a fault – image quality will not be impacted
Deactivate the function
Use a suitable memory card
Insert a charged battery and configure the correct settings
79
FAQ
Advertisement
Table of Contents
