Table of Contents
Advertisement
Magstim Model 200
2
SECTION 10: SPECIFICATIONS
GENERAL SPECIFICATIONS
This equipment is classified as Class l, with type BF Applied Parts.
It is designed to comply with the requirements of the Safety Standard EN60601-
l (90), including amendment 1 (91) and amendment 2 (95) and EMC Standard
EN 60601-1-2.
Protection against ingress of liquids - The Magstim 200
2
and its accessories
are classified as IPXO (Not Protected), as there is no specialised protection
provided against the ingress of liquids.
Protection against flammable anaesthetic mixtures - Not Protected.
Therefore, the Magstim 200
2
and its accessories are not suitable for use in the
presence of a flammable anaesthetic mixture with air, oxygen or nitrous oxide.
Mode of Operation - Continuous
EMC Susceptibility
To avoid interference problems the Magstim Model 20(/, and its accessories,
should not be used in the vicinity of any equipment that does not comply with
EMC Standard EN 60601-1-2, including mobile phones.
10.1 POWER
Voltage:
Supply Frequency:
Power Input Fuse Rating:
220-240V/l 10V-120Vac
50-60Hz
5A T x 2 (Europe; 220 - 240V)
lOA T x 2 (USA; 110 - 120V)
Equipment should be used with the line cord provided. Where a fused
line cord is used, it is recommended that a 7 A or 15A fuse be fitted for
220 - 240V and 110 - 120V operation respectively.
Max Power Requirements:
Standby
l00VA
During discharge
2000V A peak, 600V A average
The Magstim Company Limited
3001-23-USA
28
August 24, 2006
Advertisement
Table of Contents
