Yamaha WOLVERINE RMAX2 2024 Owner's Manual page 108

Getting ready to ride
Perform the Pre-Operation Checks on page
6-1. Follow the instructions starting on page
7-2 to start the engine.
Turning
Use care in turns – turning the steering wheel
too far or too fast can result in loss of control
or a rollover. Slow down before entering
turns. When making tight turns from a stand-
still or at slow speeds, avoid sudden or hard
acceleration. Driving aggressively or making
abrupt maneuvers even on flat, open areas
can cause side rollovers. Avoid sideways slid-
8
ing, skidding, or fishtailing (rear-wheel slid-
ing), and never do donuts. If you feel the
Wolverine RMAX2 begin to slide sideways or
the rear wheels begin to slide during a turn,
steer into the direction of the slide, if possible,
and gradually let off the accelerator pedal to
regain directional control and avoid rollover.
For example, if you feel the back of the vehi-
cle start to slide to your right, steer to the
right.
If you think or feel that the vehicle may tip or
roll, keep your body completely inside the
protective structure of the vehicle:
 Brace yourself by pressing your feet firmly
on the floorboard and keep a firm grip on
the steering wheel or passenger handhold.
 Do not put your hands or feet outside of the
vehicle for any reason. Do not try to stop a
tipover using your arm or leg.
Accelerating
With the engine idling in neutral and your foot
on the brake, shift the drive select lever into
low or high. NOTICE: Do not shift from low
to high or vice versa without coming to a
complete stop and waiting for the engine
to return to normal idle speed – damage to
the engine or drive train may occur. Then
release the parking brake.
8-13
Press the
[ECB02160]