Table of Contents
Advertisement
MOUNTING BRACKET SPACER INSTALLATION
ALIGN MOUNTING BRACKET WITH SPA
STEP 1
1. Rotate Pivot Assemblies until the
bottom (Mounting Bracket) touches the
side of the spa (Figure 1.1).
STEP 2
DRILL HOLES INTO SPA
1. Using the Mounting Bracket (bottom part
of the Pivot Assembly as a template,
predrill 7/64" holes into spa (Figure 2.1)
with 1" max. depth. There are (7) holes per
Mounting Bracket.
11
Figure 1.1
Figure 2.1
STEP 3
SECURE MOUNTING BRACKETS & SPACERS TO SPA
1. Making sure to align the holes on the bracket
to the holes on the spacer (P1), secure the
mounting bracket and spacers (P1) to the spa
cabinet using (14) of the pan head screws (K)
(Figure 1.3). Bag # 3 (K) (#10 2" Pan Head
screws).
IMPORTANT: Make sure holes are facing towards
the middle of the spa.
K
X7
P1
Figure 3.1
Advertisement
Table of Contents
