Table of Contents
Advertisement
THE ADVANCED SWITCHING SYSTEM
Your Delay pedal will either have a remote switch input for Tap
Tempo or a MIDI CC message Tap Tempo control number. You just
need to turn on Tap Tempo then choose whether you want to use a
remote switch or a CC message. If it is a remote switch, G3 will send
out a pulse through the remote switch output as you tap. If it is a CC
message, it will send out the relative CC message as you tap. This
will still work if you have complex MIDI messages because the
initial MIDI messages will only be sent out on the first press of the footswitch, whereas the tap tempo
information will be sent out with every tap of the foot switch.
5.2.9 HIDDEN PRESET
6. GLOBAL SETUP
GLOBAL SETUP is our utilities menu. The global setup submenu is, as it sounds, a global parameter
menu and will be the same for all presets. Here you can edit the following settings:
Number Of Banks – G3 Has up to 99 banks but if you don't use that many banks and you don't want to
be scrolling through that many, you can limit the number of banks you use here.
Bank Ext Switch - This turns on the bank external switch located on the back panel of G3 allowing you
to use any momentary switch plugged into here as your bank select
Bank Preset - G3 Atom gives you the option of selecting a foot switch to use as your bank select button.
You can select any of the footswitches or you can use the external bank select located on the rear
panel of G3.
Bluetooth - Here you can turn on G3 Atom's Bluetooth, enabling it to link to your iOS device to use with
your G3 app. If you turn on Bluetooth and it does not receive any information from your iOS device, it
will turn off after 2 minutes to ensure no unwanted connectivity.
Update in conjunction with the G3 iOS app, update enables you to update the latest G3 software. The
current version of your software will be held until the update is finished so that if there are any issues
th
November 13
, 2023
The hidden preset on G3 enables you to have a secondary preset for
every preset in G3. All you need to do is turn this feature on under
global setup and then turn it on for every preset where you wish to
activate a hidden preset. The normal presets on G3 Atom presets
are numbered 1 to 8, the hidden presets are numbered 9 to 16,
giving you up to 16 presets per bank. Once you have turned the
hidden preset on, press the preset a second time to go to the hidden
preset. This will be indicated by an H in the upper left-hand side of
G3s screen.
24
Advertisement
Table of Contents
