The GigRig G3 ATOM User Manual page 21

THE ADVANCED SWITCHING SYSTEM
The idea behind parallel is simple, it means that at some point in your signal path you split your signal
and you send that signal to different effects then either join that signal path again or continue with the
split signal being sent to different outputs.
The one thing that we were adamant we would do, before a proper parallel feature, was the ability to
flip the phase on the parallel line. This is crucial as you run a high percentage of risk of the effects in
the parallel line being out of phase with the effects on the normal line. If the effect is out of phase you
will hear a cancellation a frequency. A great example of this is if you set up a parallel signal path with
no effects selected and you flip the phase in G3 you will hear a complete cancellation of your guitar
signal.
SETTING UP PARALLEL
our standard signal and our parallel signal.
th
November 13 , 2023
Go to menu, scroll down to parallel and then scroll to the right to
turn on a parallel signal path.
now we are going to select where we split our signal.
If you want to split the signal at the input simply choose before loop
1, or if you want to split the signal before your Overdrive in loop 3
simply choose before loop 3. We now have two separate signals:
21