Stompbox - The GigRig G3 ATOM User Manual

THE ADVANCED SWITCHING SYSTEM
Go to loop order on the menu, scroll right and you will see 2 lines of
numbers - 1 through to 6 which correspond to your effects loops -
Use the EFFECTS LOOPS buttons on the top board off G3 to enter the
numbers in the order that you want to use them. You will see the
numbers start changing positions. It is that simple.

5.2.8 STOMPBOX

The standard stomp box mode Is the same on G3 as it was in G2. If you want to be able to add your
delay on top of any other preset in G3;
a. Select to the preset that you want to use
b. Turn on your delay loop using the effects loop buttons (make sure every other function including
outputs and other effect loops are turned off.)
c. Press the stompbox button and the small yellow stompbox light will come on next to the preset.
This indicates that this preset is now set up in stomp box mode.
If you now go to a standard preset and press the stompbox mode preset that you have just set up, you
will notice that it adds your delay to the sound of the original preset. You can set up as many stop box
mode presets as you like and add them on top of your standard or core tone presets.
There are 3 Stompbox modes in G3 Atom; Standard, Sticky and Flash.
Standard is the default setting, to select either of the other two modes you will need to enter the DEEP
EDIT MENU, scroll down to STOMPBOX, and select the stompbox mode you want BEFORE you create
your stompbox mode preset.
Standard – (As detailed above) A normal preset will clear any standard Stompbox mode presets.
Sticky Stomp – Once you turn on a Sticky Stomp preset, it will NOT be cleared by pressing a normal
preset the same way a standard STOMPBOX mode preset does. It will stay active until you turn it off by
pressing the footswitch. For example, if you have an effect that you like to have on most of the time
such as reverb, but like the option to be able to turn it off, set the reverb pedal up on a sticky stomp foot
switch and it will stay on until you decide to turn it off.
th
November 13 , 2023
Once you've done that and have exited the deep edit menu you will
still need to turn on the effects loops on the preset but they will be
in the order that you have determined in the loop order function.
19