Table of Contents
Advertisement
THE ADVANCED SWITCHING SYSTEM
5.2 NAVIGATING DEEP EDIT
Next to footswitches 1,2,3 and 4 you will see these symbols -
You will use these footswitches to navigate around the Deep Edit menu.
On pressing the
1. ATOM STUFF – OUTPUTS, REMOTE SWITCHES and OUT 2 PHASE
2. NAME - This is where we edit the name of the preset
3. MIDI - This is where we edit of the G3's powerful MIDI functionality
4. EXPRESSION - Assign your Expression Pedal parameters here
5. LOOP ORDER - Change the order of your effect's loops
6. STOMPBOX – Determine if Stompbox mode on this preset is Standard, Sticky, or Flash
7. TRAILS - Set up your effects Trails/Spill-over
8. PARALLEL - This is the key to parallel or Wet/Dry effect combinations
9. TAP TEMPO - Using a combination of remote switches and MIDI CC messages to enable Tap Tempo
10. HIDDEN PRESET - Each preset in G3 has a separate fully programable hidden preset
11. GLOBAL SETTINGS - setup global options including stereo pairs, Bluetooth, MIDI IN, etc
5.2.1 NAME - NAMING PRESETS
With this highlighted in the menu, press
th
November 13
, 2023
button, the LCD screen will display the following:
Use the
button (footswitch 2) to access more of the Deep Edit
menu, Including the following sub-menus:
and you will see the flashing cursor.
Move the cursor across using
down through the character set using
Once you are done, either use
the main menu or press
buttons and scroll up and
to get back to
to exit.
15
Advertisement
Table of Contents
