Advertisement
Quick Links
Advertisement
Related Manuals for Smartbox L Series
Summary of Contents for Smartbox L Series
- Page 1 L Series L 10 Standard Edition Manual...
- Page 2 This device is manufactured by Smartbox Assistive Technology Inc. United States Smartbox Assistive Technology Inc 167 Hillcrest Shopping Center Lower Burrell PA, 15068 Document: L 10 (10.2) - ST - Manual - US – A Device: TP10E-L10 Language: English Date of issue: September 2023...
- Page 3 L - Series L 10 Standard Edition This guide provides the basics for getting started with your L You can find a complete guide to all the features of your L 10 on the Smartbox Hub: hub.thinksmartbox.com/l-series...
-
Page 4: Setting Up Your Device
Setting up your device Step 1 Power on your L 10 with the power button on the left side of the device. - Page 5 Step 2 Power on the speaker by pressing and holding the Connect button for 3 seconds. Step 3 L 10 is usually provided Ready to Go. A short guide is provided with details about your configuration. Remember to take note of any account details!
- Page 6 Power The device power button is found on the top left side of your L 10. To turn on your device on, press and hold the power button for 3 seconds and press and hold the Connect button for 3 seconds.
- Page 7 Putting your L 10 to sleep Sleep is a low powered mode where the device is inactive, and the screen is off. Tap the power button to sleep the device. Tap the power button again to wake the device. Power off To turn the device off, press and hold the power button.
- Page 8 Charging When charging your L 10, ensure that the device and the speaker are charged at the same time. The L 10 charger has a Lightning cable and a USB C cable. Connect the L 10 power adapter to a mains socket. Connect the charging cable to the power adapter.
- Page 9 The Bluetooth settings are found in the Settings app. Select Settings, then Bluetooth to see a list of all connected devices. The speaker is listed as Smartbox AAC - XXXX. Press and hold the Connect Button for 3 seconds to power the speaker off.
-
Page 10: Using The Stand
Using the stand The stand for your L 10 can be used to position it on a desk or table so it can be used comfortably at any angle. - Page 11 Mounting Your L 10 can be mounted to a Rehadapt or Daessy connection (Mounting plate sold separately). The dual mounting plate can be attached with the screws and screwdriver supplied with the mounting kit to the three holes on the back of the speaker.
-
Page 12: Attaching The Strap
Attaching the strap To attach the strap to your L 10, loop the end of the strap through the attachment point, unclip the connector and push it through the loop. Clip the connector again and repeat on the opposite side. - Page 13 Finding you model and serial number When you contact our Support team, please have your device model and serial number to hand. This helps us identify the device you are having an issue with! You can find both the model number and serial number on the back of your L 10.
-
Page 14: Firmware Updates
Firmware updates From time-to-time Smartbox will issue firmware updates for the L 10 speaker. To update the firmware, download the Smartbox Link app from the App Store. hub.thinksmartbox.com/smartbox-link Open the app, if a firmware update is available you will see a... - Page 16 L 10 (10.2) - ST - Manual - US – A...
Need help?
Do you have a question about the L Series and is the answer not in the manual?
Questions and answers