Specifications; Mcx75343Amc-Neac / Mcx75343Ams-Neac Specifications - Nvidia ConnectX-7 User Manual

Specifications


Please make sure to install the ConnectX-7 card in a PCIe slot that is capable of supplying
the required power and airflow, as stated in the below table.

In Standby mode only port0 is available.
MCX75343AMC-NEAC / MCX75343AMS-NEAC
Specifications
Adapter Card Size:
Physical
76.00mm)
Adapter Card Height: 0.7 in. (17.8mm)
Bracket Type: Thumbscrew (Pull Tab) Bracket
Interfaces See Supported Interfaces
PCI Express Gen
5.0/4.0
Networking Port: Single-port OSFP InfiniBand and Ethernet
Data Rate
Protocol
Support
InfiniBand: IBTA v1.5
Auto-Negotiation:
HDR (4 lanes x 50Gb/s per lane), HDR100 (2 lanes x 50Gb/s per lane), EDR (25Gb/s per
lane), FDR (14.0625Gb/s per lane), 1X/2X/4X SDR (2.5Gb/s per lane)
Ethernet:
100GBASE-CR4, 100GBASE-CR2, 50GAUI-2 C2M, 50GAUI-1 C2M, 50GBASE-CR, 40GBASE-CR4,
25GBASE-R, 10GBASE-R, 10GBASE-CX4, 1000BASE-CX, CAUI-4 C2M, 25GAUI C2M, XLAUI C2M,
XLPPI, SFI
MCX75343AMC-
Capabilities
NEAC
MCX75343AMS-
NEAC
Voltage: 12V_EDGE, +3.3V_EDGE
Adapter Card
Power
Maximum power available through OSFP port: 17W per port (Not thermally supported)
Electrical and Thermal Specifications: To be updated in a future revision of this document
Environmental Temperature
Humidity
Altitude
(Operational)
Tall Small Form Factor (TSFF) OCP 3.0, 4.52 in. x 2.99 in (115.00mm x
SERDES @ 16/32GT/s, x16 lanes (Gen 3.0 compatible)
InfiniBand
Ethernet
a
NDR (4 lanes x 100Gb/s per lane), NDR200 (2 lanes x 100Gb/s per lane),
400GAUI-4 C2M, 400GBASE-CR4, 200GAUI-4 C2M, 200GBASE-CR4, 100GAUI-2 C2M,
Secure Boot Enabled, Crypto Enabled, Support for Multi-Host and
Socket Direct
Secure Boot Enabled, Crypto Disabled, Support for Multi-Host and
Socket Direct
Operational
Non-operational
Operational
Non-operational
3050m
NDR/NDR200/HDR/HDR100/EDR/FDR/SDR
400/200/100/50/25/10 Gb/s
0°C to 55°C
-40°C to 70°C
10% to 85% relative humidity
10% to 90% relative humidity
54