13
PB-8010, EB810
STARTER SYSTEM
2-5 Replacing starter pawl
1. Remove magneto roter (Refer to "3-10 Inspect-
ing and replacing magneto rotor").
2. Remove E-ring (V) from pawl (N).
N
V
N
3. Inspect spring (W) and pawl (N) for damage.
W
Replace the part(s) as required.
4. Install spring (W) to pawl (N) as shown.
N
W
5. Install spring (W) and pawl (N) to magneto roter
as shown.
6. Install new E-ring (V) to pawl (N).
N
V