ROOMS TO GO MIYO 9252-2W Assembly Instructions

MIYO 9252-2W ROUND DINING TABLE SKU#42392528
Caution: Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed
staple tips can cause injury, therefore, for your protection, please remove any exposed
staple used in packing.
1. We recommend that you should assemble this product with the assistance of another person;
this will make assembly easier, and will help to eliminate damage to the product or injury to
persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside
the carton during shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to
assemble your newly purchased product correctly and efficiently.

STEP 1

Secure the Table Leg (3) to the Table Leg (4) ,Secure Stretcher (5) to the Table Leg (4) with Allen Bolt
, Spring Washer and Flat Washer (A) using Allen Key (C). Fully tighten all Bolts.
This product is manufactured by MIYO for
ASSEMBLY INSTRUCTIONS
HARDWARE LISTS
SKETCH DESCRIPTION
NO.
Allen Bolt
5/16" x 18 x 2 1/8''
Spring Washer
A
5/16"
Flat washer
5/16" x 19mm x 2mm
Allen Bolt
1/4" x 20 x 1 3/8"
Spring Washer
B
1/4"
Flat Washer
1/4" x 19mm x 2mm
Allen Wrench
C
4mm
C
3
SKETCH
NO.
Q'TY
8PCS
1
8PCS
2
8PCS
3
4PCS
4PCS
4
4PCS
5
1PC
HARDWARE PACK LOCATION (1)
9252-2W ROUND DINING TABLE SKU#42392528
5
PART LISTS
DESCRIPTION
TABLE TOP
MOUNING PLATE
TABLE LEG
TABLE LEG
STRETCHER
C
4
Page 1 of 3
Q'TY
1PC
1PC
1PC
1PC
1PC